Replacing The Battery - PeakTech 3355 Manual De Instrucciones

8. Troubleshooting
There may be times when your meter does not operate properly.
Here are some common problems that you may have and some
easy solutions to them.
Meter does not operate:
1. Always read all the instructions in this manual before use.
2. Check to be sure the battery is properly installed.
3. Check to be sure the battery is good.
4. If the battery is good and the meter still doesn't operate,
check to be sure that both ends of the fuse are properly
installed.

9. Replacing the battery

Warning:
To avoid electric shock, disconnect the test leads from any source
of voltage before removing the back cover or the battery/fuse door.
1. Disconnect the test leads from the meter.
2. Open the battery/fuse door by loosening one screw on the
battery/fuse door using a screw-driver.
3. Clip the new battery into battery holder, observing the correct
polarity.
4. Place the battery into the battery/fuse compartment.
5. Put the battery/fuse door back in place. Secure with the screw.
-60-