PeakTech 3355 Manual De Instrucciones página 37

* Do not turn the rotary function switch during voltage or current
measurement, otherwise the meter could be damaged.
* Use caution when working with voltages above 35 V DC or
25 V AC. These Voltages pose shock hazard.
* Replace the battery as soon as the battery indicator "BAT"
appears. With a low battery, the meter might produce false
reading that can lead to electric shock and personal injury.
* Fetch out the battery when the meter will not be used for long
period.
* Periodically wipe the cabinet with a damp cloth and mid
detergent. Do not use abrasives or solvents.
* The meter is suitable for indoor use only
* Do not operate the meter before the cabinet has been closed
and screwed safely as terminal can carry voltage.
* Do not store the meter in a place of explosive, inflammable
substances.
* Do not modify the equipment in any way
* Do not place the equipment face-down on any table or work
bench to prevent damaging the controls at the front.
* Opening the equipment and service – and repair work must only
be performed by qualified service personnel
* Measuring instruments don't belong to children hands.
1.1. Input limits
Input limits
mA range AC/DC
A range
Frequency, Resistance,
Capacitance, Duty Cycle, Diode
test, Continuity and
Temperature
1000 V DC/AC
10 sec.
400 mA AC/DC 1000 V / 0,5 A
(fused)
10 A AC/DC 1000 V / 10 A
(fused)
600 V AC/DC
1000 V AC/DC
-36-
less than
rms
(P 3355)
rms
(P 3360)
rms