Safety Symbols - PeakTech 3355 Manual De Instrucciones

1.2. Safety Symbols

This symbol adjacent to another symbol, terminal or
operating device indicates that the operator must refer to
an explanation in the operating instructions to avoid
personal injury or damage to the meter.
This symbol advices the user that the terminals so
marked must not be connected to a circuit point at which
the voltage, with respect to earth ground, exceeds (in this
case) 1000 V AC or VDC
This symbol adjacent to one or more terminals identifies
them as being associated with ranges that may, in normal
use, be subjected to particulary hazardous voltages. For
maximum safety, thermometer and its test leads should
not be handled when these terminals are energized.
Indicates protection class II, double insulation
IP67
Dust- and waterproof
µA
The maximum current that can measure with this
mA
terminal is 400 mA AC/DC. This terminal is protected by
500 mA/1000 V fuse
A
The maximum current that can measure with this terminal
is 10 A AC/DC. This terminal is protected by 10 A/1000 V
fuse.
-37-