Bluetooth Telephone
Displaying BD address of your
cellular phone
1
Use MULTI-CONTROL to select
Delete phone in the function menu.
Delete phone appears in the display.
2
Push MULTI-CONTROL up or down to
select a registration assignment.
Each time MULTI-CONTROL is pushed up or
down, the registration assignment is switched
in the following order:
Phone1 (user phone 1)—Phone2 (user phone
2)—Phone3 (user phone 3)—Guest1 (guest
phone 1)—Guest2 (guest phone 2)
# If the assignment is empty, No data is dis-
played and the operation is not possible.
3
Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
# Pushing MULTI-CONTROL right returns to the
device name.
4
Press BAND to return to the standby
display.
Displaying BD address of this unit
1
Use MULTI-CONTROL to select
Device INFO. in the function menu.
The device name (Pioneer BT unit) of this unit
appears in the display.
2
Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
# Pushing MULTI-CONTROL right returns to the
device name.
Note
When you push MULTI-CONTROL down while
the BD address (or the device name) of this unit
is displayed, the system version of this unit ap-
pears. About the system version, refer to Display-
ing system version for repair on this page.
Displaying system version
for repair
Should this unit fails to operate properly and
you consult with dealer for repair, you may be
asked to indicate the system versions of this
unit and of Bluetooth module. You can display
the versions and confirm them.
1
Use MULTI-CONTROL to select
Device INFO. in the function menu.
The device name (Pioneer BT unit) of this unit
appears in the display.
2
Push MULTI-CONTROL down to switch
to the system version of this unit.
The system (microprocessor) version of this
unit is displayed.
# Pushing MULTI-CONTROL left displays the
version of the Bluetooth module of this unit.
Pushing MULTI-CONTROL right returns to the
system version of this unit.
Section
08
57
En