Machine's Safety Equipment; Emergency Stop; Testing The Emergency Stop; General Safety Precautions - Husqvarna PP 325 E Manual De Instrucciones

Machine' ' ' ' s safety equipment
This section describes the machine's safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the "What is
what?" section to locate where this equipment is positioned
on your machine.
WARNING! Never use a machine that has
!
faulty safety equipment!
All servicing and repair work on the machine
requires special training. This is especially
true of the machine' ' ' ' s safety equipment. If
your machine fails any of the checks
described below you must contact your
service agent. When you buy any of our
products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.

Emergency stop

The emergency stop at the machine breaks the mains power
supply.

Testing the emergency stop

• Make sure that the hydraulic hoses are connected to each
other.
• Start the machine.
• Press the emergency stop and check that the engine
stops.

General safety precautions

Do not use the machine without first reading and
understanding the contents of this Operator's Manual.
WARNING! There is always a risk of shocks
!
from electrically powered machines. Avoid
unfavourable weather conditions and body
contact with lightning conductors and metal
objects. Always follow the instructions in the
Operator's manual to avoid damage.
• Never use the machine if you are tired, if you have drunk
alcohol, or if you are taking medication that could affect
your vision, your judgement or your co-ordination.
• Wear personal protective equipment. See instructions
under the heading "Personal protective equipment".
• Never pull out the plug by pulling the cord.
• Keep all cords and extension cords away from water, oil
and sharp edges. Make sure the cord is not pinched in
doors, fences or the like. Otherwise it can cause the object
to become live.
6 –
English
SAFETY INSTRUCTIONS
• Check that the cord and extension cord are intact and in
good condition.
• Never use the machine if the cord is damaged, hand it in
to an authorized service workshop for repair.
• Do not use an extension cord while it is rolled up to avoid
overheating.
• The machine should be connected to an earthed outlet
socket.
• Check that the mains voltage corresponds with that stated
on the rating plate on the machine.
• Always switch off the power to the hydraulic unit and pull
out the electric cable before moving the equipment.
• Keep all parts in good working order and ensure that all
fixtures are properly tightened.
• Never use a machine that is faulty. Carry out the checks,
maintenance and service instructions described in this
manual. Some maintenance and service measures must
be carried out by trained and qualified specialists. See
instructions under the heading Maintenance.
• Do not modify safety equipment. Check regularly that they
function as they should. The machine must not be run with
defective or disassembled safety equipment.
• Never allow anyone else to use the machine without first
ensuring that they have understood the contents of the
operator's manual.
• People and animals can distract you causing you to lose
control of the machine. For this reason, always remain
concentrated and focused on the task.
• Make sure no unauthorised persons are in the working
area, otherwise there is a risk of serious personal injury.
• Be careful as clothing, long hair, and jewellery can get
caught in moving parts.
• Observe care when lifting. You are handling heavy parts,
which implies the risk of pinch injuries or other injuries.

Transport and storage

• Always switch off the power to the hydraulic unit and pull
out the electric cable before moving the equipment.
• If there is a risk of freezing, the machine must be drained
of any remaining water coolant.
• The power unit is constructed as a wheeled cart with the
possibility of hanging hydraulic hoses for simple
transportation at the workplace.
• For transportation between workplaces, the power unit
should be stored in vertical position with the distribution
box facing upwards.
• Store the equipment in a lockable area so that it is out of
reach of children and unauthorized persons.