Custom Overlay Drawer Panels - KitchenAid W10741575A Manual De Uso

If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT:
The thickness of the overlay panels must be ³⁄₄" (19.05 mm).
To avoid damage to the drawers, each overlay panel must not
weigh more than 10 lbs (4.5 kg).
Do not exceed the height dimension for the overlay panels.
Panels that exceed the height dimension may damage the
refrigerator drawers, cabinets or countertop.
The width of the overlay panels may vary according to the
width of the cabinet opening.
For the installation of the customer panel, you will need the
following parts:
Screws (SS Flat M4x12 tapping 1) (16)
Self-tap wood screws (4)
Drawer overlay hook plate right (SPHC T=2.3) (4)
Drawer overlay hook plate left (SPHC T=2.3) (4)
A
C
A. SS Flat M4x12 tapping screws
B. Self-tap wood screws
NOTE: Some or all parts may or may not be included. If your
product does not include these parts, contact Assistance or
Service or ask a specialist.
8

Custom Overlay Drawer Panels

B
D
D. Overlay hook plate right
F. Overlay hook plate left
Top and Bottom Overlay Drawer Panel Dimensions
15" (38.05 cm)
3³⁄₈"
1¹¹⁄₁₆" (4.35 cm)
9.5 cm
1³⁄₄"(4.4 cm)
3³⁄₈" (8.6 cm)
³⁄₈" (9 mm)
1"
1" (2.6 cm)
(2.4 cm)
A
Reverse Side
¹³⁄₁₆" (2.0 cm)
¹⁵⁄₁₆" (2.3 cm)
A
¹⁄₈
A. Rout
(1.9 cm)
1⁵⁄₁₆" (3.3 cm)
⁷⁄₁₆" (1.2 cm)
1⁵⁄₁₆" (3.3 cm)
" (3.18 mm) deep.
³⁄₄"