Key To Symbols; Symbols On The Machine - Husqvarna T540 XP II Manual De Instrucciones

Symbols on the mac hine:
WARNING! Chainsaws can be
dangerous! Careless or improper use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the
machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator ' s hands must be
used to operate the chainsaw.
Never operate a chainsaw holding it with
one hand only.
Never let the guide bar tip come in
contact with any object.
WARNING! Kickback may occur when the
nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
Recommended cutting
equipment in this example: -
Bar length 16 inches - Max.
nose radius 9 Teeth - Chain
type Husqvarna H37
Other approved bar and chain
combinations in Operator's Manual.
Measured maximum kickback value
without triggering the brake, for the bar and
chain combination on the label.
Measured maximum kickback value
without chain brake for the bar and chain
combination on the label.
2 – English
KEY T O SYMBOLS
Chain brake, activated (right)
Chain brake, not activated
(left)
Air purge
Refuelling.
Adjustment of the oil pump
Chain oil fill.
Working position.
Choke.
Handle insert size.
Always use the
recommended spark plug
type! Use of the wrong
spark plug can damage
the piston/cylinder. Check
that the spark plug is fitted
with a suppressor.
The rating plate showing
serial number. yyyy is the
production year, ww is the
XX
productionweek.
Other symbols/decals on the mac hine refer to special
XX
certification requirements for certain markets.
yyyywwxxxxx