Orbegozo MHP 3500 Manual De Instrucciones página 26

MHP 3500
"TIME+" or "TIME-" to increase or decrease the delay time at the increment of 10 minutes. The maximum
delay is 13 hours.
Example: Now it is 8:30p.m,if you would like your bread to be ready in the next morning at 7 o'clock, i.e. in 10
hours and 30 minutes. Select your menu, color, loaf size then press the TIME+ or TIME - to add the time until
10:30 appears on the LCD. Then press the STOP/START button to activate this delay program. You can see
the dot flashed and LCD will count down to show the remaining time. You will get fresh bread at 7:00 in the
morning, If You don't want to take out the bread immediately, the keeping warm time of 1hour starts.
Note: For time delayed baking, do not use any easily perishable ingredients such as eggs, fresh milk,
fruits, onions, etc.
KEEP WARM
Bread can be automatically kept warm for 60 minutes after baking. If you would like to take the bread out,
switch the program off with the START/STOP button.
MEMORY
If the power supply has been broken off during the course of bread making, the process of bread making will
be continued automatically within 10 minutes, even without pressing Start/stop button. If the break time
exceeds 10 minutes the memory cannot be kept and the bread maker must be restarted. But if the dough is
no further than the kneading phase when the power supply breaks off, you can press the "START/STOP"
straight to continue the program from the beginning.
ENVIRONMENT
The machine may work well in a wide range of temperatures, but there could be a difference in loaf size
between a very warm room and a very cold room. We suggest the room temperature should be between 15
℃ and 34℃.
WARNING DISPLAY:
1、If the display shows "H HH" after the program has been started, (see below figure 1) the temperature
inside is still too high. Then the program has to be stopped. Open the lid and let the machine cool down
for 10 to 20 minutes.
2、If the display shows "E rr" after you have pressed START/STOP, (see below figure 2) the temperature
sensor is disconnected please check the sensor carefully by Authorized expert.
3、If the display shows"L LL"after pressing the Start/Stop button ( except the programs BAKE), it means the
temperature inside is too low（accompanied by 5 beep sounds）, stop sound by pressing the Start/Stop
button, open the lid and let the machine rest for 10 to 20 minutes to return to room temperature, or
select the BAKE program and make the temperature inside the chamber increase rapidly"
NOTE: The temperature in bread maker is lower than room temperature if placing
bread maker in cooler place (such as air conditioning room, cold storage) after a period
of time and then move it to normal room temperature immediately to make bread．
26