Capacity Chart; Important Unpacking Instructions - Cuisinart DFP-14N Serie Instrucciones Y Libro De Recetas

CAPACITY CHART

Recommended work bowl capacity for various foods
FOODS
Chopped and Puréed Fruit
and Vegetables
Chopped or Puréed Meat, Poultry,
Fish or Seafood
Bread Dough
Nuts for Nut Butters
Sliced or Shredded Fruit,
Cheese, or Vegetables
Cake Batter
Cookie Dough
IMPORTANT
UNPACKING
INSTRUCTIONS
This packing contains a Cuisinart
Food Processor, and these standard
parts for it: metal chopping blade,
slicing disc and shredding disc, de-
tachable stem for discs and spatula.
CAUTION: THE CUTTING TOOLS
HAVE VERY SHARP EDGES. To
avoid injury when unpacking the
parts, please follow these instruc-
tions:
1. Place the box on a low table or
on the fl oor next to the kitchen
counter or table where you plan
to keep the food processor. Be
sure the box is right-side up.
2. Remove the cardboard panel
and the instruction material with
plastic spatula.
3. You will see a rectangular block
of plastic foam that holds the
processor parts each fi tted into
a cavity in the foam.
4. The detachable stem (A) for the
discs is in a cavity at one
short side of the foam block.
Remove it fi rst.
5. The slicing disc (B) is on one
®
long side and the shredding
disc (C) on the other. Slide
them out of their grooves WITH
GREAT CARE; THE BLADES
ARE SHARP.
6. Now only the work bowl cover
(D) and the pusher assembly (E)
remain in the foam block. Grasp
the edge of the work bowl cover
and lift it straight up. Lift the
pusher assembly straight up by
following.
7. Lift out the foam block.
8. The machine base and work
bowl with metal blade are at the
bottom of the box.
CAREFULLY REMOVE THE METAL
BLADE BY GRASPING THE CEN-
TER WHITE HUB AND LIFTING
IT STRAIGHT UP. NEVER TOUCH
THE BLADES, WHICH ARE RAZOR
SHARP.
9. Lift the bowl straight up.
CAPACITY
3 cups
¼ pounds
2
2½ pounds (5 cups flour, yielding
two 1-1/4 pound loaves)
3 cups
14 cups
4 pounds (five 8-inch layers)
3½ pounds (90 cookies)
10. You will see the machine base
11. Save the shipping cartons and
2
remain at the bottom of the box.
Remove the base by grasping
the base housing with both
hands and lifting it straight up.
Place the base on a counter or
table and read the instructions
thoroughly before using the
machine.
plastic foam blocks. You may
want to use them in shipping
the processor at a later date.