Hama EWS-3200 Instrucciones De Uso página 7

Celsius/Fahrenheit
Press the – button (33) to switch between °C and °F for the
temperature display.
Alarm
Note – Alarm
• When activated, alarm mode 1 only triggers an alarm
signal on weekdays (Monday to Friday).
• When activated, alarm mode 2 only triggers an alarm
signal on Saturday and Sunday.
The A1 or A2 alarm symbol will appear in the seconds
position of the time display during setting.
• Press the MODE button (31) once or twice to display
alarm A1 or A2.
• Press and hold the MODE button (31) for approx. 3
seconds to set the signal time of the alarm displayed. The
hours display begins to ash.
• Press the + button (32) or the – button (33) to select
the hour for the alarm time and con rm your selection
by pressing the MODE button (31). The minutes display
begins to ash.
• Repeat the process to set the minutes for the alarm time.
• If no entry is made for 20 seconds, setup mode
automatically exits.
• To select and activate or deactivate the corresponding
alarm, press the MODE button (31) repeatedly to select
A1 or A2.
• Press the – button (33) to activate or deactivate the
selected alarm (A1 or A2). The active alarm is displayed by
the or alarm symbol (15). When an active alarm
2
1
is deactivated, the corresponding alarm symbol A1 or A2
disappears.When the alarm is triggered, the active alarm
symbol (15) begins to ash and an alarm sounds.
• Press any button (except the SNOOZE/LIGHT sensor [37])
to stop the alarm. Otherwise, it will stop automatically
after 2 minutes.
Note – Snooze function
• While the alarm signal is sounding, press the SNOOZE/
LIGHT sensor (37) to activate the snooze function. The
alarm symbol (15) will start to ash on the display.
he alarm signal will stop for 5 minutes, after which it
will sound again.
• Press any button (except the SNOOZE/LIGHT sensor
[37]) to stop the snooze function and the alarm.
6.3. Weather forecast/ atmospheric pressure history
• Based on changes in the atmospheric pressure and the
data saved, the base station is able to make weather
forecasts for the next 12 to 24 hours.
Note – Weather forecast
The weather forecast function is not available during the
rst few hours of operation because it requires data that is
collected during operation.
• The weather forecast and the current weather are indicated
by ve different symbols (1):
Symbol (1)
6.4 Temperature, humidity and atmospheric pressure
trends
Note
The trend displays are not available during the rst few hours
of operation because they require data that is collected during
operation.
The weather station indicates a trend as to how the values for
the outdoor temperature/humidity (7/30), room temperature/
humidity (24/9) and atmospheric pressure (2) are likely to
develop over the next few hours.
Display
• Repeatedly press the HISTORY button (34) to access the
atmospheric pressure values (4) for the last twelve hours in
1 hour intervals (3).
• If you do not make an entry for the 20 seconds, the current
atmospheric pressure (4) is displayed again automatically.
• The bar graph (5) shows the history of the atmospheric
pressure within the last 12 hours.
• As soon as the room temperature falls below +4°C, the
symbol for risk of frost (27) is displayed.
Weather
Sunny
Slightly cloudy
Cloudy
Rainy
Stormy
Trend
Increasing
Constant
Decreasing
5