Kenwood KDC-BT49DAB Manual De Instrucciones página 25

TROUBLESHOOTING
Symptom Remedy
• Sound cannot • Reconnect the Android device.
• If in [HAND MODE], launch any media player application
be heard during
playback. on the Android device and start playback.
• Sound output only • If in [HAND MODE], relaunch the current media player
from the Android application or use another media player application.
• Restart the Android device.
device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 19)
• Make sure KENWOOD MUSIC PLAY APP is installed on the
Cannot playback at
[BROWSE MODE]. Android device. ( 9)
• Reconnect the Android device and make the appropriate
setting in [ANDROID SETUP]. ( 9)
• If this does not solve the problem, the connected Android
device does not support [BROWSE MODE]. ( 19)
• Switch off the developer options on the Android device.
"NO DEVICE" or
• Reconnect the Android device.
"READING" keeps
• If this does not solve the problem, the connected Android
flashing.
device does not support [BROWSE MODE]. ( 19)
Playback is intermittent Turn off the power saving mode on the Android device.
or sound skips.
• Reconnect the Android device.
"ANDROID ERROR" /
• Restart the Android device.
"NA DEVICE"
"ACTN DISABLED" An unavailable operation has been performed.
"AHA APP UPDATE Make sure you have installed the latest version of the Aha™
REQUIRED" application for KENWOOD application on your device.
"AHA UNAVAILABLE" Your device cannot be connected to Aha Radio server.
"CHECK APP" There is no response from Aha server.
Symptom Remedy
"CHECK DEVICE" Check the Aha application on your device.
"CONNECT PHONE" Connect your device to the unit.
"LOGIN FAILED" Logging into Aha has failed.
"NETWORK The network has been disconnected.
UNAVAILABLE"
"POOR GPS" The GPS reception condition of your smartphone is poor.
"NO SKIPS" Skips is not allowed.
• Search from the Bluetooth device again.
No Bluetooth device is
• Reset the unit. ( 3)
detected.
• Make sure you have entered the same PIN code to both the
Bluetooth pairing
cannot be made. unit and Bluetooth device.
• Delete pairing information from both the unit and the
Bluetooth device, then perform pairing again. ( 11)
• Adjust the microphone unit's position. ( 11)
Echo or noise is heard
• Check the [ECHO CANCEL] setting. ( 12)
during a phone
conversation.
• Reduce the distance between the unit and the Bluetooth
Phone sound quality
is poor. device.
• Move the car to a place where you can get a better signal
reception.
• Use voice calling method in a more quiet environment.
Voice calling method
• Reduce the distance from the microphone when you speak
is not successful.
the name.
• Make sure the same voice as the registered voice tag is
used.
21
ENGLISH