Dtmf (Dual Tone Multi Frequency) Calls; Manual Dialing; Autodial; Redial - Kenwood TK-2180 Manual De Instrucciones

DTMF (DUAL TONE MULTI FREQUENCY) CALLS

M D
ANUAL IALING
■ M 1
ETHOD
Press and hold the PTT switch, then enter the desired digits
using the front panel keypad.
• If you release the PTT switch, transmit mode will end even if
the complete number has not been sent.
• If your dealer has activated the Keypad Auto PTT function,
you need not press the PTT switch while entering digits. The
DTMF code will be sent automatically when you press a key.
■ M 2
ETHOD
Enter the desired digits using the front panel keypad
(maximum of 30 digits). After entering the complete
number, press the PTT switch.
• The DTMF code is transmitted after pressing the PTT switch.
Note: Switching OFF the transceiver power clears the number.
A
UTODIAL
Autodial allows you to store and quickly recall 32 names (up to
12 characters per name) and DTMF numbers (up to 16 digits
per number).
R
EDIAL
1 To redial the last called number, press the key programmed
as Autodial.
• The first entry in the Autodial list appears on the display.
2 Press the
called number.
3 Press the PTT switch to make the call.
Note: Switching OFF the transceiver power clears the redial
memory.
30
key followed by the 0 key to display the last