Dtmf Calls; Autodial; Stun; Dtmf Number Display - Kenwood TK-2312 Manual De Instrucciones

AUTODIAL

Autodial allows you to quickly call DTMF numbers that have
been programmed onto your transceiver.
1 Press the key programmed as [Autodial].
• The last called number appears.
2 Press <B or C> to select your desired Autodial list number.
3 Press the PTT switch to make the call.
• Press S to exit without making a call.

STUN

This function is used when a transceiver is stolen or lost.
When the transceiver receives a call containing a stun code,
the transceiver becomes disabled. The stun code is cancelled
when the transceiver receives a call with a revive code.
• "STUN" appears while the transceiver is stunned.

DTMF NUMBER DISPLAY

Note: This features can only be activated when DTMF Signaling is
turned OFF.
When you receive a DTMF code containing at least 3 digits, it
will appear on the display. Each successive digit will continue
to scroll across the display within 1 second of the previous
digit. If no digit is received for more than 1 second, then when
a new digit is received, the display will clear and begin with the
new digit.
Press any key to cancel the DTMF number display.

DTMF CALLS

15