Tabla de contenido
Idiomas disponibles
Idiomas disponibles
piece, turn laser light ON and align beam with the
line of cut .
Hold the tool firmly, squeeze the trigger and allow
the tool to reach desired speed.
Press down (to keep the saw foot flat against the
work surface) as you slowly push the saw forward,
keeping the beam in line with the line of cut .
After completion of the cut, turn the laser light OFF.
MAINTENANCE AND SERVICE
MAINTENANCE AND CLEANING
• Before any work on the machine itself, pull
the mains plug.
• For safe and proper working, always keep
the machine and ventilation slots clean.
The retracting blade guard must always be able to
move freely and retract automatically. Therefore,
always keep the area around the retracting blade
guard clean. Remove dust and chips by blowing
out with compressed air or with a brush.
Saw blades that are not coated can be protected
against corrosion with a thin coat of acid-free oil.
Before use, the oil must be removed again, other-
wise the wood will become soiled.
Resin and glue residue on the saw blade pro-
duces poor cuts. Therefore, clean the saw blade
immediately after use.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for SKIL power tools.
In all correspondence and spare parts order,
please always include the 10-digit article number
given on the type plate of the machine.
WARNING! Important instructions for connect-
ing a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it must
be disposed of safely.
GUARANTEE
We guarantee Skil appliances in accordance with
statutory/country-specific regulations (proof of
purchase by invoice or delivery note).
Damage attributable to normal wear and tear,
overload or improper handling will be excluded
from he guarantee.
In case of complaint please send the machine,
undismantled, to our dealer or the Skil Service
Center for Electric Power Tools.
Warning! Freight and insurence costs are charged
to the client, even for warranty claims.
DISPOSAL
The machine, accessories and packaging should
be sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into
household waste!
According the European Guideline
2002/96/EC for Waste Electrical
and Electronic Equipment and its
implementation into national right, power tools
that are no longer usable must be collected sepa-
rately and disposed of in an environmentally cor-
rect manner.
Subject to change without notice.
29
Tabla de contenido
