Matrix CXC Instrucciones De Montaje página 9

Ocultar thumbs Ver también para CXC:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58
BEFORE YOU BEGIN
LOCATION OF THE UNIT
Place the equipment on a level and stable surface away from direct
sunlight. The intense UV light can cause discoloration on the plastics.
Locate your equipment in an area with cool temperatures and low humidity.
Please leave a clear zone on all sides of the equipment that is at least 60
cm (23.6"). This zone must be clear of any obstruction and provide the
user a clear exit path from the machine. Do not place the equipment in
any area that will block any vent or air openings. The equipment should
not be located in a garage, covered patio, near water or outdoors.
WARNING!
Our equipment is heavy, use care and additional help if necessary when
moving. Failure to follow these instructions could result in injury.
LEVELING THE EQUIPMENT
It is extremely important that the levelers are correctly
adjusted for proper operation. Turn leveling foot
clockwise to lower and counter-clockwise to raise unit.
Adjust each side as needed until the equipment is level.
An unbalanced unit may cause belt misalignment
or other issues. Use of a level is recommended.
ENGLISH
TRAINING AREA
2 M
(78.7")
0.56 M
(22.2")
1.45 M
(57.2")
9
FREE AREA
2 M
(78.7")
1.76 M
(69.4")
2.65 M
(104.4")
PROPER USAGE
1. Sit on the cycle facing the handlebars.
Both feet should be on the floor
one on each side of the frame.
2. To determine proper seat position, sit on
the seat and position both feet on the
pedals. Your knee should bend slightly at
the furthest pedal position. You should be
able to pedal without locking your knees or
shifting your weight from side to side.
3. Adjust pedal straps to desired tightness.
4. To get off of the cycle, follow the
proper usage steps in reverse.
loading

Este manual también es adecuado para:

Cxm