Idiomas disponibles
Idiomas disponibles
Appliance
freezes or
cools too much
The food is not frozen
enough.
Heavy build-up of frost
on the door seal.
Unusual noises
Side panels are hot.
If the malfunction shows again, contact the Customer Support Service.
Side by Side Refrigerator | Frigorífico Side by Side | Frigorífico Side by Side
Fuse has blown or is defective.
Socket is defective.
Temperature is set too cold or the
appliance runs on BOOST mode.
Temperature
is
not
properly
adjusted.
Door was open for an extended
period.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
The appliance is near a heat source.
Door seal is not air tight.
Appliance is not levelled.
Appliance is touching the wall or
other objects.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or the
wall.
It's normal. Heat exchange parts are
in the sides.
Check fuse, replace if necessary.
Power plug malfunctions are to be
corrected by the Customer Support
Service.
Turn the temperature regulator to a
warmer setting temporarily.
Refer to the initial Temperature Setting
section.
Open the door only as long as necessary.
Turn the temperature regulation to a
colder setting temporarily.
Refer to the Installation section.
Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool
setting). At the same time, shape the
warmed door seal by hand such that it
sits correctly.
Re-adjust the feet.
Move the appliance slightly.
If
necessary,
carefully
component out of the way.
Put on gloves to touch the sides, if
needed.
EN
bend
the
25
