Idiomas disponibles
Idiomas disponibles
It is advisable to wait at least four hours before connecting the
appliance to allow the oil to flow back in the compressor.
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible, the spacers of the product should be against a wall
to avoid touching or catching warm parts (compressor, condenser) to
prevent possible burn.
The appliance must not be located close to radiators or cookers.
Make sure the power plug is accessible after the appliance has been
installed.
Service
Any electrical work required to do the servicing of the appliance should
be carried out by the Customer Support Service or competent person.
This product must be serviced by the Customer Support Service, and
only genuine spare parts must be used.
Energy saving
Don't put hot food in the appliance;
Don't pack food close together as this prevents air circulating;
Make sure food don't touch the back of the compartment(s);
If electricity goes off, don't open the door(s);
Don't open the door(s) frequently;
Don't keep the door(s) open for too long time;
Don't set the thermostat on exceeding cold temperatures;
All accessories, such as drawers, shelves and door racks, should be
kept there for lower energy consumption.
Environment Protection
This appliance does not contain gasses which could damage the ozone
layer, in either its refrigerant circuit or insulation materials. The appliance
shall not be discarded together with the urban refuse and rubbish. The
insulation foam contains flammable gases: the appliance
10
