Idiomas disponibles
Idiomas disponibles
To attach the blade guard to the wall
saw
WARNING:
from the power supply before you start the
assembly.
Make sure that the blade guard is undamaged and
that the blade guard guide is mounted and centered
on the blade guard. To make it easier to mount the
blade guard, remove the outer sections from the middle
section.
1. Turn up the guide flange (A) for the blade guard on
the saw unit. This makes the water connection point
straight out from the pivot arm.
A
24
Disconnect the product
2. Aim the blade guard runners on to the guide tracks
towards the guide flange. Push the blade guard over
the blade.
3. Fit the blade guard bracket onto the saw unit
attachment. Tighten the locking knob (A) properly.
A
2092 - 002 - 15.01.2024
