Maintenance; Maintenance Chart - Efco DS 2200 Manual De Instrucciones

Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily work requires longer than normal
or harsh cutting conditions are present the suggested intervals should
be shortened accordingly.
Complete Machine
Controls (Ignition Switch, Choke
Lever, Throttle Trigger, Trigger
Interlock)
Fuel Tank and Fuel Line
Fuel Filter
Cutting Attachments
Bevel Cear
Clutch Drum
Cutting Attachments Guard
Spark Arrestor Screen
(in Muffler)
All Accessible Screws and Nuts
(Not Adjusting Screws)
Air Filter
Cylinder Fins
Starter System Vents
Starter Rope
Carburetor
Spark Plug
Vibration Mounts
Cutting Attachments
nuts and screws

MAINTENANCE

Maintenance Chart

Inspect (Leaks, Cracks, and Wear)
Clean
Check Operation
Inspect (Leaks, Cracks, and Wear)
Clean
Inspect
Clean, Replace FIlter Element
Inspect
(Damage, Sharpness, and Wear)
Sharpen
Inspect
(Damage and Grease Level)
Inspect (Damage and Wear)
Replace
Inspect (Damage and Wear)
Replace
Inspect (Damage and Wear)
Clean or Replace
Inspect
Retighten
Clean
Replace
Clean
Clean
Inspect (Damage and Wear)
Replace
Check idle (Cutting Attachments
must not rotate at idle)
Check Eletrode Gap
Replace
Inspect (Damage, and Wear)
Replace by Dealer
Check that the locking nut of
the cutting equipment is tighten
correctly
X X
X
X X
X X
X
X X
X
X
X X
X
X
X
X
X
X
X X
X
X
en
X
Every 6
X
Months
X X
X
X X
X X
X
Every 6
X
Months
X
X
X
Every 6
X
Months
X X
25