Virutex EVOLUTION PEB200 Manual De Instrucciones página 24

(Fig. 5)
A
(Fig. 5b)
24 - PEB250 EVOLUTION
• Turn lever A (Fig. 3), remove the plate guide B (Fig. 3) and
assemble it as shown in (Fig. 4).
B
• Check that the handles A and B (Fig. 5) are aligned as shown.
• Save the wooden box and cover for storing and transporting
the gluing machine.
A
5.2 ROLLER HOLDER ASSEMBLY
Place the roller holder on the machine plate, securing it with
screw A and knob B provided (Fig. 5b). The roller holder allows
efficient edging of long lengths over 500 mm, ensuring correct
introduction of the edge band into the edging line.
B