Idiomas disponibles
Idiomas disponibles
Setting up the Wi-Fi connection
Action
Plug the FRITZ!Repeater into an electrical outlet near the
FRITZ!Box.
1
Wait until the Connect LED starts flashing slowly.
Start the connection on the FRITZ!Repeater: Press the Connect
2
button. The Connect LED flashes quickly.
Start the connection on your FRITZ!Box:
• FRITZ!Box with Connect/WPS, Connect or WPS button: Press
button briefly. The WLAN or Connect LED flashes.
3
• On a FRITZ!Box with the WLAN/WPS or WLAN button: Press
the button for about 6 seconds until WLAN starts flashing.
• On another wireless router, press the button that starts WPS.
The connection is established as soon as the Connect LED and
the Connection Quality LEDs light up.
4
If the Connect LED starts flashing slowly again, repeat steps 2
and 3 of these instructions.
When the connection has been established, reposition the FRITZ!Repeater.
Continue reading on page 22.
If the Wi-Fi connection cannot be established at the touch of a button, you will
find alternative instructions in the PDF manual at
20
Connect
Illustration
Connect
en/avm.de/service.
Connect
within
2 minutes
Connect
