Idiomas disponibles
Idiomas disponibles
level Max. No-
load rotation
speed
1
−1
1900 min
2
−1
2400 min
3
−1
3050 min
4
−1
3600 min
Inserting and removing the
battery
WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.
NOTICE! Risk of damage! An incorrect
battery can damage the device and bat-
tery.
Inserting the battery
1. Push the battery (7) along the guide in-
to the battery holder (6).
You will hear the battery click into
place.
Removing the battery
1. Press and hold the battery release (11)
on the battery (7).
2. Pull the battery out of the battery hold-
er (6).
Switching on and off
WARNING! Risk of injury due to un-
intentional continuous operation of the
tool. Before inserting the batteries into
the unit, check that the on/off switch (15)
works properly and returns to the off posi-
tion when released.
Switching on
1. Insert the rechargeable battery (7) into
the tool.
2. Select the direction of rotation with the
rotation direction switch (3).
3. Press and hold the On/off switch (15).
Max. Impact
rate
−1
1200 min
−1
2400 min
−1
3800 min
−1
4300 min
Switching off
1. To turn it off, release the on/off switch
(15).
2. Wait until the power tool has stopped
before placing it down.
3. When taking a break: Set the direc-
tion of rotation switch (3) to the centre.
These safety measures prevent acci-
dentally starting the power tool.
This allows you to hang the tool on a
belt using the belt clip (8). With the
belt clip you can open bottles with
crown caps.
4. Remove the rechargeable battery (7)
from the device if you are leaving the
device unattended or if you have fin-
ished working.
PARKSIDE app
The PARKSIDE app lets you monitor the
device and control certain functions. The
functions may change with updates to the
app and firmware. For more information
on the PARKSIDE app, see the instructions
for the smart battery.
Requirements
To find the device in the PARKSIDE app,
the following requirements must be met:
• The PARKSIDE app is installed on your
smartphone and Bluetooth® is activ-
ated.
• The following battery is inside the
device: PARKSIDE Performance Smart
battery PAPS 204 A1 or PAPS 208 A1.
This battery is already connected to the
PARKSIDE app.
The device communicates with the app
via the battery.
Connecting the device to the
PARKSIDE app
1. Insert the smart battery (7).
2. Press the On/Off switch (15).
GB
MT
31
