Idiomas disponibles
Idiomas disponibles
1 ≙ no-load rotation speed: 0–1900
−1
min
/impact rate: 0-1200 min
torque: 120 Nm
2 ≙ no-load rotation speed: 0-2400
−1
min
/impact rate: 0-2400 min
torque: 150 Nm
3 ≙ no-load rotation speed: 0-3050
−1
min
/impact rate: 0-3800 min
torque: 190 Nm
4 ≙ no-load rotation speed: 0-3600
−1
min
/impact rate: 0-4300 min
torque: 226 Nm
1 2 3 4 ≙ speed/impact/torque rate
is set in the PARKSIDE App (Expert
Mode).
• Direction of rotation switch (3)
NOTICE! Only operate the direction
of rotation switch when the tool has
stopped!
The arrow on the direction switch (3) in-
dicates the working direction.
•
Screw in screw/nut
• Centre Switch lock
•
Unscrew screw/nut
• On/Off switch (15)
• After inserting the battery: Connect-
ing to the PARKSIDE app
• Switching on: Press
• Infinitely variable speed regula-
tion: The more you press the on/off
switch, the higher the speed.
• Switching off: Release
• "Connected" indicator (5)
Status of the connection with the
PARKSIDE app
flashing connection attempt
continuous light connection estab-
lished
Attaching and removing the
attachment tool
−1
/
Notes
• Tool holder: ¼" (6.35 mm) hexagon
−1
/
drive
• Attachment tool: Screw bit/Bit recept-
acle/Socket/Socket adapter (not in-
−1
/
cluded)
• Directional data viewed from behind.
Attaching the attachment tool
−1
/
(Fig. B)
1. Unlock tool holder (1): Slide the lock-
ing sleeve (2) forward.
2. Insert the bit holder (18) or socket ad-
apter (19) into the tool holder (1).
3. Clamp attachment tool: Release the
locking sleeve (2).
4. Slide the desired screw bit/socket onto
the bit holder (18/socket adapter
(19).
5. Check that the attachment tool is firmly
secure by pulling on it.
Removing the attachment tool
(Fig. B)
1. Unlock tool holder (1): Slide the lock-
ing sleeve (2) forward.
CAUTION! Risk of burn injury! At-
2.
tachment tools can become very hot.
Wear protective gloves whenever ap-
propriate.
Remove the attachment tool.
Checking the battery charge
level
LEDs
red, orange, green Battery charged
red, orange
red
GB
MT
Meaning
Battery partially
charged
Battery needs to be
charged
29
