Idiomas disponibles
Idiomas disponibles
GB
MT
1. Press the button (9) next to the charge
level indicator button (10) on the bat-
tery (7).
The LEDs of the charge level indicator
show how much charge remains in the
battery.
2. Charge the battery (7) when only the
red LED on the charge level indicator
(10) is illuminated.
Charging the battery
See also the charger instruction manual.
Notes
• If warm, allow the battery to cool be-
fore charging.
• Do not expose the battery to direct sun-
light for long periods and do not place
it on a radiator (max. 50°C).
Charging the battery
1. Remove the battery (7) from the
device.
2. Push the battery (7) into the charging
slot of the battery charger (16).
3. Connect the battery charger (16) to a
power outlet.
4. After charging, disconnect the battery
charger (16) from the mains.
5. Pull the battery (7) out of the battery
charger (16).
Control LEDs on the charger (16):
green
red
lights up
—
—
lights up
—
flashes
flashes
flashes
30
Meaning
• Battery is fully
charged
• stand-by (No
battery inserted)
Battery is charging
Battery is over-
heated
Battery is defective
Operation
Working instructions
General Information
• The tightening torque depends on the
impact duration.
• In order to achieve optimum impact
force, do not exert any pressure
against the screw/nut.
• Only use the cordless impact wrench
for pre-assembly when tightening
screws and nuts. The desired target
torque of the screw or nut should not
be achieved with the cordless impact
wrench, but with a torque wrench set to
the target torque.
NOTICE! Always follow the
manufacturer's instructions for tight-
ening screws or nuts. Follow the
manufacturer's guidelines for the in-
spection of screws or nuts in accord-
ance with time or performance.
• The tightening torque actually achieved
must be checked in all cases with a
torque wrench.
NOTICE! After a wheel change is car-
ried out, reference is regularly made to
an inspection of the wheel bolts or nuts.
That inspection must be carried out with
a torque wrench after 50 to 100 km.
Pre-selecting the rotation
speed
The speed button (13) lets you to choose
the individual speed levels. You can read
the current level on the display (level)
(14).
• Infinitely variable speed regulation: The
more you press the on/off switch (15),
the higher the speed/torque.
