Idiomas disponibles
Idiomas disponibles
2
Features and Functions
MinMax Recording
The MinMax operation stores the maximum, minimum, and average input values
during a series of measurements. When the input goes below the recorded
minimum or maximum value, the multimeter beeps and records the new value.
The multimeter also calculates an average of all readings taken since the MinMax
mode was activated. From the multimeter's display, you can view the following
statistical data for any set of readings:
– MAX: highest reading since the MinMax function was enabled
– MIN: lowest reading since the MinMax function was enabled
– AVG: the average or mean of all the readings since the MinMax function was
– MAXMINAVG: present reading (actual input signal value)
Refer to the following steps to use the MinMax Recording mode:
1 Press
2 The beeper sounds when a new maximum or minimum value is recorded.
3 Press
4 Press
– The average value is the true average of all measured values taken in the
NOTE
– If an overload is recorded, the averaging function will stop and the average
– The auto power off feature (
40
enabled
for more than one second to enter the MinMax Recording mode.
The multimeter is now in the continuous mode or non-data hold (non-trigger)
mode.
to scroll through the maximum, minimum, average, and present
readings. The MAX, MIN, AVG or MAXMINAVG annunciator lights up
correspondingly to the displayed readings.
for more than one second to exit the MinMax Recording mode.
MinMax Recording mode.
value becomes OL (overload).
) is disabled in MinMax Recording mode.
Keysight U1241B and U1242B User's and Service Guide
