Ottobock Kenevo 3C60 Instrucciones De Uso página 64

Beep signal
10 x long
30 x long
Error while charging the product
LED LED Battery char­
on on ger connected
power bat­ to product
sup­ tery
ply char­
ger
No
64
Vibration signal
3 x long
5 x long
10 x long
1 x long, 1 x short
repeated every 3
seconds
Error
Country-specific plug
adapter not fully engaged on
power supply
Non-functional socket
Defective power supply
Event
Battery charge level
under 35%
Battery charge level
under 20%
Battery charge level
under 15%
After the beep and
vibration signals, the
product switches to
empty battery mode
and then switches
off.
Severe error/indic­
ation of safety
mode activation
For example, sensor
not operational or
valve drive failure
Possibly no switching
into safety mode.
Required action
Charge battery soon.
Charge battery immedi­
ately; the product will be
switched off after the next
warning signal.
Charge the battery.
Walking possible with
restrictions. Please note
the possible change in
flexion/extension resist­
ance.
Attempt to reset this error
by connecting/discon­
necting the battery char­
ger. The battery charger
must remain connected
for at least 5 seconds
before it is disconnected.
If the error persists, use
of the product is prohib­
ited. The product must be
inspected immediately by
an O&P professional.
Resolution
Check whether the country-
specific plug adapter is fully
engaged on the power sup­
ply.
Check socket with another
electric device.
The charger and the power
supply must be inspected by
a prosthetist.