Electrolux LIT30230C Manual De Instrucciones página 101

To stop the sound: touch
To deactivate the function: touch
then touch . The remaining time counts
down to 00.
The function has no effect on the
operation of the cooking zones.
5.6 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other symbols
on the control panels are locked.
The function does not stop the timer
functions.
Touch to activate the function.
comes on. The heat setting is lowered to
1.
To deactivate the function, touch
previous heat setting comes on.
5.7 Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental
change of the heat setting.
Set the heat setting first.
To activate the function: touch
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
5.8 Child Safety Device
This function prevents an accidental
operation of the hob.
To activate the function: activate the hob
with . Do not set any heat setting. Touch
for 4 seconds.
the hob with .
.
and
. The
.
. The
comes on. Deactivate
To deactivate the function: activate the hob
with . Do not set any heat setting. Touch
for 4 seconds.
the hob with .
To override the function for only one
cooking time: activate the hob with
comes on. Touch
heat setting in 10 seconds. You can
operate the hob. When you deactivate the
hob with the function operates again.
5.9 OffSound Control (Deactivation
and activation of the sounds)
Deactivate the hob. Touch
The display comes on and goes out. Touch
for 3 seconds.
of the front left zone to choose one of the
following:
• - the sounds are off
• - the sounds are on
To confirm your selection wait until the hob
deactivates automatically.
When the function is set to
the sounds only when:
• you touch
• Minute Minder comes down
• Count Down Timer comes down
• you put something on the control panel.
5.10 Power management
• All cooking zones are connected to one
phase. See the illustration.
• The function activates when the total
electricity loading of the cooking zones
exceeds maximum electricity loading of
the phase.
• The function divides the power between
cooking zones.
• The function decreases the power to the
other cooking zones.
• The heat setting display of the reduced
zones alternates between the chosen heat
setting and the reduced heat setting. After
some time the heat setting display of the
reduced zones stays on the reduced heat
setting.
comes on. Deactivate
.
for 4 seconds. Set the
for 3 seconds.
or comes on. Touch
you can hear
ENGLISH 101