Idiomas disponibles
Idiomas disponibles
EN
English (Original instructions)
DEHUMIDIFIER
SUPREME DRY
Please do not install or use your dehumidifier
before you have carefully read this manual.
Please keep this instructions manual for an
eventual product warranty and for future reference.
DESCRIPTION
A
Air outlet
B
Control panel
C
Handles
D
Castors
E
Air filter
F
Air filter cover
G
Drainage outlet
H
Water tank
I
Drainage pipe
Control panel
1. On/Off button
2. Lock button
3. Humidity/Time selector buttons
4. Display
5. Humidity setting button
6. Time button
7. Fan speed button
8. Full tank indicator
9. Power on indicator
10. Lock indicator
11. Timer on indicator
12. Fan speed indicators
If the model of your appliance does not have the
accessories described above, they can also be bought
separately from the Technical Assistance Service.
USE AND CARE
• Before each use, completely unplug the supply cord from
the power supply.
• Do not use the appliance if its start/stop device does not
work.
• Do not remove the wheels from the appliance.
• Use the handles to lift or transport the appliance.
• Do not turn the appliance over while it is in use or
connected to the mains.
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Keep this appliance out of the reach of children and/or
persons with reduced physical, sensory or mental abilities
or who are unfamiliar with its use.
• Do not expose the appliance to extreme temperatures.
Keep the device in a dry, dust-free place protected from
direct sunlight. Never leave the appliance unattended. It
will also save energy and prolong the life of the device.
INSTALLATION
ASSEMBLING THE WHEELS
• To assemble the wheels, place the appliance face down.
• Fit the wheels by pressing them into their housing.
• Lift the appliance again and check that the wheels work
correctly.
• Leave the device in its operating position and do not turn
on it for 1 hour.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all product's packaging has been
removed.
• Please read carefully the "Safety advice and warnings"
booklet before first use.
• Prepare the appliance according to the function you wish
to use.
USE
• Extend the supply cord completely before plugging in.
• Plug the appliance into the mains.
• Turn the appliance on, by using the on/off button.
• The display light comes on.
• The appliance will emit a buzzing sound and will display
the humidity level in the room.
• Select the desired function.
• To avoid a fierce start-up of the fan, it is advisable to start
off from the lowest speed position and, once the fan has
been switched on, progressively increase the speed to
the desired position.
DEHUMIDIFIER
• Press the humidity setting button (5) to initiate this
function. The display will show the default level. The
default level is 40%.
