PI150
2
Safety instructions
2.1
General safety
Only connect the device using the connecting cable to the 12 V cigarette lighter or the
12 V on-board socket of the vehicle.
Do not connect the 230 V output of the inverter to a different 230 V source.
Always disconnect the power supply when working on the inverter.
Note that even after the fuse triggers, parts of the inverter remain live!
Never pull the plug out of the cigarette lighter by the cable.
If the connection cable is damaged, you must replace it to avoid hazards.
Do not operate the device if it is visibly damaged.
This device may only be repaired by qualified personnel. Inadequate repairs may
cause serious hazards.
Disconnect the connection cable
– Before cleaning and maintenance
– After use
Ensure that the ventilation slots are not covered.
Keep the inverter out of the reach of children.
2.2
Operating the device safely
When using the device in a vehicle, make sure that it does not impair operation of the
vehicle.
Before starting the device, ensure that the power supply line and the plug are dry.
Never start the device when your hands are wet.
Only operate the device when you or another person can attend to it.
Do not operate the device on hot surfaces.
Do not operate the device near flames or other heat sources (heating, direct sunlight,
gas ovens etc.).
Never immerse the appliance in water.
Protect the appliance and the cable against heat and moisture.
EN
13