Husqvarna CL400 Manual De Usuario página 8

Introduction..................................................................... 8
Safety..............................................................................9
Assembly...................................................................... 11
Operation...................................................................... 11
Product description
The product is a pedestrian-controlled cable layer.
Product overview
(Fig. 1)
1. Drill operation bail
2. Handlebar tilt bail
3. Drive bail
4. Wire adjuster for the handlebar tilt bail
5. Counter
6. Cable winder
7. Muffler
8. Support wheel
9. Feeding fin
10. Drill
11. Engine oil plug
12. Fuel tank cap
13. Starter rope handle
14. Air filter
15. Throttle control
16. Forward motion adjuster
17. Wire adjuster for the drill operation bail
Symbols on the product
(Fig. 2) This product is in accordance with EC
directives.
(Fig. 3)
This product conforms to applicable UK
regulations.
(Fig. 4) Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
8
Contents
Maintenance................................................................. 13
Troubleshooting............................................................ 15
Technical data.............................................................. 16
Declaration of Conformity............................................. 18
Introduction
Intended use
Use the product to put boundary wire and guide wire
for robotic lawn mowers into the ground. Do not use the
product for other tasks.
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
(Fig. 10)
(Fig. 11)
(Fig. 12)
Note:
Other symbols/decals on the product refer to
certification requirements for other commercial areas.
CE IDENTIFICATION PLATE
(Fig. 13)
of the product is specified in
data on page 16 and on the label.
Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Wear the protective mask.
Wear the protective clothes.
Wear the protective boots.
Risk of fire. Always stop the engine before
refueling. Do not smoke when you fill
fuel. Do not fill fuel near sparks or naked
flames.
Look out for thrown objects and ricochets.
Make sure that persons or animals keep
a distance of a minimum of 20 m during
work.
DANGER - Keep hands or feet away
from the rotary cutting component on the
product. Do not work on the product when
the engine is in operation.
1394 - 003 - 05.12.2023
Technical