Husqvarna CL400 Manual De Usuario página 10

damages. Tighten loose parts. Repair damages and
replace damaged parts. Let an approved service
agent do the repair.
• Do not attach the drill operation bail permanently to
the handle when the motor is started.
• Put the product on a stable, flat surface and start it.
• Always stay behind the product when you operate it.
• Let all the wheels stay on the ground and keep 2
hands on the handle when you operate the product.
• Keep your hands and feet away from the rotating
drill.
• Do not tilt the product when you start the motor or
during operation of the product.
• Be careful when you pull the product rearward.
• Do not lift up the product when the motor is started.
If you must lift the product, first stop the motor, pull
up the safety key and remove the battery.
• Do not walk rearward when you operate the product.
• Release the drill operation bail to stop the drill when
it is necessary to tilt the product for transportation.
• Do not run with the product when the motor is
started. Always walk when you operate the product.
• Stop the motor before you change the cable laying
depth. Do not make adjustments with the motor
started.
• Do not let the product stay out of view with the motor
started. Stop the motor and make sure that the drill
does not rotate.
• The vibrations in the product during operation can
be different from the declared vibration value in
Technical data on page 16 . The difference is
caused by variations in how the product is used.
If you operate the product frequently or for long
periods of time, take breaks regularly to prevent
injury from vibrations.
Safety instructions for operation
Read the instructions that follow before you use the
product.
• Make sure that the cable on the cable guide is intact.
• Make sure that the tube in the feeding fin is intact.
Replace the tube if it is worn or damaged.
(Fig. 14)
• Make sure that the edge around the hole is not
sharp or damaged. Replace the cable guide if it is
damaged.
• Make sure that all screws are tightened.
• Make sure that all levers are in neutral position.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
• Personal protective equipment cannot fully prevent
injury but it decreases the degree of injury if an
10
Read the warning
accident does occur. Let your dealer help you select
the right equipment.
• Use heavy-duty slip-resistant boots or shoes. Do not
use open shoes or go with bare feet.
• Use heavy, long pants.
• Use protective gloves when necessary, for example
when you attach, examine or clean the cable laying
equipment.
•
We recommend to use hearing protection.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
• Do not use a product with safety devices that are
damaged or do not operate correctly.
• Do not remove or do modifications to safety devices.
• Do a check of the safety devices regularly. If the
safety devices are damaged or do not operate
correctly, speak to your Husqvarna service agent.
Drill operation bail
The drill operation bail stops the drill. When the drill
operation bail is released, the drill stops.
To do a check of the drill operation bail, start the motor
and then release the drill operation bail. If the drill does
not stop in 3 seconds, speak to an approved Husqvarna
service agent.
(Fig. 15)
Muffler
The muffler keeps the noise levels to a minimum and
sends the exhaust fumes away from the operator.
Do not use the product if the muffler is missing or
damaged. A damaged muffler increases the noise level
and the risk of fire.
WARNING:
hot during and after use and when the
engine operates at idle speed. Be careful
near flammable materials and/or fumes to
prevent fire.
To do a check of the muffler
• Examine the muffler regularly to make sure that it is
attached correctly and not damaged.
Safety instructions for maintenance
WARNING:
instructions that follow before you use the
product.
• The exhaust fumes from the engine contain carbon
monoxide, an odourless, poisonous and very
Read the warning
The muffler becomes very
Read the warning
1394 - 003 - 05.12.2023