Identification Label; Receiving And Storage - WEG CF W100 Serie Manual Del Usuario

2.4 IDENTIFICATION LABEL

The identification label is located on the side of the inverter. For further details on positioning the label, refer to
Figure A.2 on page 89.
Model (inverter
intelligent code)
Serial number
Production order
Rated input data (voltage,
current and frequency)

2.5 RECEIVING AND STORAGE

The CFW100 is supplied packed in a cardboard box. There is an identification label affixed to the outside of the
package, identical to the one affixed to the side of the inverter.
Verify whether:
The CFW100 identification label corresponds to the purchased model.
„
Any damage occurred during transportation.
„
Report any damage immediately to the carrier.
If the CFW100 is not installed soon, store it in a clean and dry location (temperature between -25 ºC and 60 ºC
(-13 ºF and 140 ºF)), with a cover to prevent dust accumulation inside it.
ATTENTION!
When the inverter is stored for a long period, it becomes necessary to perform the capacitor reforming.
Refer to the procedure recommended in
of this manual.
Certifications
CFW100 Side Label
Figure 2.3: Description of the CFW100 identification label
WEG stock item
Manufacturing date (14 corresponds
to the week and I to the year)
Rated output data (voltage,
current and frequency)
Section 6.4 PREVENTIVE MAINTENANCE on page 26
General Information
CFW100 G2 | 11