Considered Standards - WEG CF W100 Serie Manual Del Usuario

Technical Specifications

8.2.1 Considered Standards

Safety UL 508C - power conversion equipment
„
Standards UL 61800-5-1 - adjustable speed electrical power drive systems - part 5-1: EMC Safety requirements - electrical,
„
thermal and energy
UL 840 - insulation coordination including clearances and creepage distances for electrical equipment
„
EN61800-5-1 - safety requirements electrical, thermal and energy
„
EN 50178 - electronic equipment for use in power installations
„
EN 60204-1 - safety of machinery. Electrical equipment of machines. Part 1: general requirements.
„
Note: The final assembler of the machine is responsible for installing a safety stop device and a supply
disconnecting device
EN 60146 (IEC 146) - semiconductor converters
„
EN 61800-2 - adjustable speed electrical power drive systems - part 2: general requirements
„
Rating specifications for low voltage adjustable frequency AC power drive systems
„
Electromagnetic EN 61800-3 - adjustable speed electrical power drive systems - part 3: EMC product standard including specific
„
Compatibility test methods
Standards CISPR 11 - industrial, scientific and medical (ISM) radio-frequency equipment - electromagnetic disturbance
(*)
„
characteristics - limits and methods of measurement
EN 61000-4-2 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section
„
2: electrostatic discharge immunity test
EN 61000-4-3 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section
„
3: radiated, radio-frequency, electromagnetic field immunity test.
EN 61000-4-4 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section
„
4: electrical fast transient/burst immunity test
EN 61000-4-5 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section
„
5: surge immunity test
EN 61000-4-6 - electromagnetic compatibility (EMC) - part 4: testing and measurement techniques - section
„
6: immunity to conducted disturbances, induced by radio-frequency fields
Mechanical EN 60529 - degrees of protection provided by enclosures (IP code)
„
Standards UL 50 - enclosures for electrical equipment
„
IEC 60721-3-3 - classification of environmental conditions - part 3: classification of groups of environmental
„
parameters and their severities - section 3: stationary use at weather protected locations level
(*) Compliance with standards upon installation of external RFI filter. See
30 | CFW100 G2
Table 8.2: Considered standards
Chapter 3 INSTALLATION AND CONNECTION on page 12.