Idiomas disponibles
Idiomas disponibles
To operate the tool, select the speed setting you wish with
the variable speed dial (9), shown in Figure K, and depress
the trigger (2) as shown in Figure J. The speed setting can be
adjusted either with the tool ON or OFF.
Be sure to select the proper speed for your sanding operation.
If in doubt about the proper speed for your operation, test the
performance at low speed settings and gradually increase until
a comfortable speed is found.
Helpful Hints
Always start your belt sander before it is in contact with
u
the workpiece and do not switch it off until after it has been
lifted from the workpiece.
Always hold your belt sander with two hands.
u
Use the correct grit sanding belt for your application.
u
The following is a suggested list of belt grits to use with
different materials.
Material
Belt Grit
Solid Wood
80
Veneer
150
Chipboard
60/80
Plastics
100
Steel
80 (do not use dust bag or vacuum as sparks could
ignite flammable particles in bag or vacuum)
Paint Removal
40/60
Balsa Wood
100
Acrylic
100 40/60 100
Maintenance
Your STANLEY FATMAX corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded/
cordless power tools:
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the appliance/
u
tool if the appliance/tool has a separate battery pack.
Or run the battery down completely if it is integral and then
u
switch off.
Regularly clean the ventilation slots in your appliance/tool/
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth. Do
u
not use any abrasive or solvent-based cleaner.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
(Original instructions)
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com.
Technical data
Voltage
V
DC
No-load speed
m/min
Belt Size
mm
Weight
kg
Charger
SFMCB11
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
Battery
SFMCB201
Voltage
V
18
DC
Capacity
Ah
1.5
Type
Li-Ion
Level of sound pressure according to EN62841:
Sound pressure (L
) 87 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 95 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
Vibration emission value a
= 2.6 m/s
h
Declaration of Conformity
The Supply of Machinery (Safety) Regulations 2008
Belt Sander - SFMCW223
Stanley Europe declares that these products described under
"technical data" are in compliance with:
EN 62841-1:2015 + AC:2015 +A11:2022;
EN 62841-2-4:2014 + AC:2015;
ENGLISH
SFMCW223
SFMCB12
SFMCB14
230
230
18
18
1.25
2
SFMCB202
SFMCB204
SFMCB206
18
18
2.0
4.0
Li-Ion
Li-Ion
K = 1,5 m/s
2
2
18V
180 - 280
75 x 457
3.1
230
18
4
18
6.0
Li-Ion
11
