the tyre inside the open centre during rotation.
• Rotate the tyre and make the necessary adjustments until the upper bead has been
mounted.
• It may be useful to assist the operation with a second RunFlat gripper and/or the bead
presser accessory, if available.
• Using the bead breaker disc, remove the RunFlat grippers used.
• Connect the inflation line to the valve for bead insertion.
6.11. TYRE INFLATION
6.11.a. SAFETY INDICATIONS
The use of inflation devices (e.g. guns) connected to power sources outside of the
machine is not permitted.
Always comply with national safety regulations as they could be more restrictive than
what is indicated in the manual, according to the principle that a more restrictive
standard takes precedence over the less restrictive one.
If tires being mounted require more than the
tire manufacturer's maximum bead seating
pressure and , the wheel should be removed
from the tire changer, placed in an inflation
cage, and inflated per manufacturer's instruc-
tions.
140
DANGER
DANGER
NOTICE
DANGER
Artiglio 50/55 User Manual