For correct equipment operation, the air produced must be suitably treated (not
above 5/4/4 according to ISO 8573-1)
Check that the Lubricator unit B fig. 2a contains air
lubricating oil; top up if necessary. Use SAE20 oil.
The customer must provide an air cut-off valve upstre-
am of the air treatment and regulator device supplied
with the machine.
Before operating any command, follow the
instructions affixed to the machine.
See also Section 3.3, "FIRST INSTALLATION"
1.2.d TECHNICAL DATA
For ARTIGLIO 55 see the manual 4-133267.
- Tyre types processed .. CONVENTIONAL - LOW PROFILE - RUN FLAT - BALOON - BSR
- Wheel dimension range:
• rim diameter ................................................................................................ from 12" to 30"
• maximum tyre diameter .............................................................................. 1200 mm (47")
• maximum tyre width .................................................... 15" (from wheel support surface)
- Turntable:
• tools positioning in relation to rim ......................................................................... manual
• resting side ................................................................................................................flanged
• centring ..................................................................................................................... on cone
100
NOTICE
WARNING
NOTICE
Artiglio 50/55 User Manual
B
2a