Air Pressures - Corghi ARTIGLIO 50 Manual De Uso

• clamping ....................................................................................................mechanical-manual
• drive system............................................................................... 2-speed motor-inverter unit
- Bead Breaker Unit:
• bead breaking cylinder force ......................................................................................... 7600 N
- Power supply:
• compressed air operating power: ..........................................................................8÷10 bar
• min. air operating flow: ......................................................................................... 100 Nl/min
- Electric motor rating
Motor Rating
200-230V/1ph 50/60Hz
115V/1ph 60Hz
- Wheel lift:
• lifting capacity ................................................................................................................... 85 Kg
- Weight ................................................................................................... 320 kg (with wheel lifter)
- Noise level
• Weighted noise level A (LpA) in working position ..............................................< 70 dB (A
The stated noise levels are emission levels and do not necessarily represent safe operating
levels. Although there is a relationship between emission levels and exposure levels, this
cannot be used reliably to establish whether or not further precautions are necessary. The
factors which determine the level of exposure to which the operator is subjected include the
duration of the exposure, the characteristics of the workplace, other sources of noise, etc. The
permitted exposure levels may also vary from country to country. However, this information
will enable the machine's user to make a more accurate evaluation of the hazard and risk.
1.2.e. AIR PRESSURES
The machine is equipped with an internal pressure limiting valve to minimize the risk of
over inflating the tyre.
1. Never exceed these pressure limitations:
• Supply line pressure (from compressor) is 220 psi (15 bar).
• Operating pressure (gauge on regulator) is 150 psi (10 bar).
Bead setting pressure (gauge on hose) is the tyre manufacturer's maximum pressure as
stated on the sidewall of the tyre
Artiglio 50/55 User Manual
Rotation
kW
speed rpm
0.75 7-20
0.75 7-20
DANGER
• EXPLOSION HAZARD
• Never exceed the tyre pressure recommended by the tyre
manufacturer. Never mismatch tyre size and rim size.
• Avoid personal injury or death
Torque Weight of electric/
Nm electronic part kg
1200 10.2
1200 10.2
UK
101