Idiomas disponibles
Idiomas disponibles
PROBLEM
There is
excessive
vibration.
The motor
works but the
blade doesn't
cut the grass.
48
56-VOLT LITHIUM-ION COMMERCIAL 22" LAWN MOWER — LMX5300SP/LMX5300SP-FC
CAUSE
◾
The cutting blade is loose.
◾
The cutting blade is unbalanced.
◾
The cutting blade is bent.
◾
The motor shaft is bent.
◾
The mower is set to cut too much
grass at once.
◾
The blade speed mode is not set
properly.
◾
The blade is not tightened to the
.
required torque
SOLUTION
◾
Tighten the blade bolt.
◾
Balance the blade, following
the section "SHARPENING THE
BLADE".
◾
Replace the blade.
◾
Contact the EGO Customer
Service.
◾
Raise the deck to a higher
cutting-height setting.
◾
Set the blade speed to a lower
setting.
◾
Re-tighten the blade. The
recommended torque for the blade
bolt is 36-43 ft-lb (50-60 Nm).
