Idiomas disponibles
Idiomas disponibles
INSTALLING THE HANDLE
The lawn mower is shipped with the handle partially assembled.
WARNING:
and securely installed and unfolded. Use caution to avoid pinching fingers and cable
between the parts.
1. Switch off the mower.
2. Remove the battery pack(s).
3. Position the lawn mower on a level surface.
4. Unscrew and put aside both wing bolts.
5. Move the handle forward until the locking gear on the handle assembly is facing the
gear on the mower (Fig. 2a).
6. Align the marks on the locking gear and handle mounting plate (Fig. 2b).
7. Make sure that the hole for wing bolt in the handle is aligned with the hole in the gear
in the mower, then insert and finger-tighten the wing bolts on both sides (Fig. 2b).
2a
2b
22
56-VOLT LITHIUM-ION COMMERCIAL 22" LAWN MOWER — LMX5300SP/LMX5300SP-FC
Do not attempt to start the lawn mower until the handle is properly
Gear
Handle
Mounting Plate
Marks
Locking
Gear
