Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
PROBLEM
The mower
or self–propel
function fails to
start.
The mower cuts
unevenly.
The mower
does not mulch
.
properly
46
56-VOLT LITHIUM-ION COMMERCIAL 22" LAWN MOWER — LMX5300SP/LMX5300SP-FC
CAUSE
◾
The battery pack(s) charge is
depleted.
◾
The battery pack(s) is not
properly inserted into the battery
compartment.
◾
The handle is not locked in an
operating position and the mower
status indicator flashes green.
◾
The mower deck is clogged with
grass and debris.
◾
The blade is dull.
◾
The grass-cutting height is not
set properly.
◾
The blade is installed incorrectly.
◾
The blade speed mode is not set
properly.
◾
Wet grass clippings are sticking
to the underside of the deck.
◾
The mower is set to cut too much
grass at once.
◾
The blade speed mode is not set
properly.
SOLUTION
◾
Charge the battery pack(s).
◾
Insert the battery pack(s) into
battery compartment until you
hear a "click".
◾
Stop the mower and make sure
that the handle is locked in one
of the three operating positions.
◾
Clean the mower deck and
ensure that the blade has
freedom of movement
◾
Sharpen or replace the blade.
◾
Move the deck height to a higher
setting.
◾
Re-install the blade, following
the section "REPLACING THE
BLADE" in this manual.
◾
Select a proper blade speed
mode.
◾
Wait until the grass dries before
mowing.
◾
Raise the deck to a higher
cutting-height setting.
◾
Select Mode 2 or 1 blade speed
mode.
