Idiomas disponibles
Idiomas disponibles
CUTTING-HEIGHT ADJUSTMENT
(FIG. 9a & 9b)
WARNING:
from the deck when adjusting the cutting
height.
The mower can be set to 8 cutting heights
between 3/4 in (20 mm) and
4 in (105mm). A marking indicates the
selected cutting height.
This mower allows you to adjust the
cutting height of the front and the rear of
the mower individually. Choose the proper
cutting height according to the type and
condition of the grass to be cut.
1. Switch off the lawn mower and wait
for the cutting blade to come to a
complete stop.
2. Remove the battery pack(s).
3. Pull the front or rear cutting height adjustment lever out of the detent and set it to
the desired position.
NOTE:
To avoid overloading the motor, avoid setting the cutting height too low in tall
grass. If the motor speed begins to slow, raise the cutting height.
56-VOLT LITHIUM-ION COMMERCIAL 22" LAWN MOWER — LMX5300SP/LMX5300SP-FC
Keep your feet away
Front Cutting-height
9a
Adjustment Lever
a
b
b
9b
a
b
b
Rear Cutting-height
Adjustment Lever
29
