Idiomas disponibles
Idiomas disponibles
REPLACING THE BLADE
WARNING:
damaged blade can become dangerous projectiles. Thrown objects can cause serious
injury. Inspect the blade regularly and do not operate the mower with a worn or
damaged blade.
WARNING:
cutting edges with rags or other materials when performing any maintenance on the
mower blade. Always remove the battery pack(s) when servicing or transporting the
mower.
NOTICE:
The following tools (not included) are required for replacing the blade:
◾
9/16 in (14 mm) wrench (impact wrench is recommended)
◾
9/16 in (14 mm) torque wrench
◾
A metal rod with a diameter of 1/4 in (6.35 mm) or less
◾
A metal rod with a diameter of 5/16 in (8 mm) or less
To remove the blade
1. Stop the motor, remove the battery
pack(s) and grass bag from the
mower.
2. Turn the mower on its side.
3. Insert a metal rod (stabilizer 1)
Ø5/16 (8 mm) or less in the
stabilizer hole to prevent the blade
from rotating when loosening the
bolt.
4. Use the wrench to turn the blade bolt
COUNTERCLOCKWISE to loosen and
remove the bolt (Fig. 18a).
NOTICE:
If the bolt rotates with the
motor shaft when loosening the bolt, place
another metal rod with diameter less than
1/4 in (6.35mm) into the aligned holes of
the blade and fan to act as stabilizer 2.
56-VOLT LITHIUM-ION COMMERCIAL 22" LAWN MOWER — LMX5300SP/LMX5300SP-FC
A worn, cracked, or damaged blade can break and pieces of the
Always protect your hands by wearing heavy gloves or wrapping the
18a
Stabilizer 2
Stabilizer 1
18b
Outer Flange
Inner Flange
Bolt
41
