Idiomas disponibles
Idiomas disponibles
Fig. 2
28
29
16
30
28
Head Assembly is the part of the saw that includes the
blade, guards, motor, main handle, and dust collection
system.
29
Arbor Lock, when pressed, keeps the blade from
rotating. It's used during blade removal or installation,
when loosening or tightening the arbor bolt.
30
Base provides the working surface that supports the
workpiece.
31
Miter Detent Plate Screws, four, accessible through
holes in the miter scale, are loosened to allow the posi-
tion of the detent plate to be adjusted.
32
Mounting Holes for Optional Crown Stop
33
Bevel Stop Indicators (Left and Right) allow you to
select the most common bevel angles: 33.9°, 45°, or
47°.
Getting to Know Your Miter Saw
31
13
14
16
-12-
7
37
11
33
10
32
34
Bevel Lock Knob locks the head assembly at the
desired bevel angle.
35
Slide System allows the head assembly to smoothly
slide in and out. It can be locked all the way to the rear
or in the fully-extended position.
36
Dust Bag collects the dust from sawing operations. To
empty it, uncouple it from the dust port and open the
zipper at the bottom.
37
Pivot Post provides support for and is the pivot point
for the head assembly.
36
35
9
34
13
