Idiomas disponibles
Idiomas disponibles
Step 12
Press the two raised points on the back
of the bezel into the corresponding holes
on the side burner front panel. Then,
firmly seat the valve nozzle into the
burner venturi. Hold in place while you
perform Step 13.
Step 13
From the back of the side burner front
panel, insert the two screws that are
already attached on the side burner valve
through the corresponding key holes on
the side burner front panel and bezel.
Depending on the side burner valve
provided with your grill, you will be using
either the outside key holes (Figure 1),or
the inside key holes (Figure 2). Pull the
valve downward or upward to lock into
place. Then tighten the two screws.
£LWARNING:
Never use your grill
without leak testing all
gas connections and
hoses. See the section on
"Leak Testing" in this
manual for proper
procedures.
Step 14
Install the side burner control knob onto
valve stem and place the side burner
grate onto the side burner table.
Side Table Holes
Side
_.
Burner
Valve
Valve
Nozzle
Figure 1
Figure 2
Side Burner
Grate
Side Burner
Control Knob
9
