tau DC20 Guía Para La Instalación página 21

Terminals Input/Output
PHOTOCELLS
15 - 16 (N.C. contact)
PRESENCE DETECTORS
17 - 18
TEST
CONNECTOR J16:
Terminals Input/Output
EMERGENCY
(N.C.)
19 - 21
(21= Common)
CLOSE/LATCHING
RELAY
20 - 21 (N.O.)
DIP # 7 on SW1 on OFF
(21= Common)
CLOSE/LATCHING
RELAY
20 - 21 (N.O.)
DIP # 7 on SW1 on
ON(21= Common)
INTERLOCK
21 - 22 (N.C.)
(21= Common)
SIDE SENSOR
23 - 21 (N.C.)
(21= Common)
STOP/
ANTI-PANIC
24 - 21
(N.C.)
(21= Common)
NOTE: The STOP lock/function blocks any movement in progress of the automation, while
Door Status Function
Closed None.
Opening None.
Closing Reverts motion and opens.
Open Door won't close until photocells are released.
In pause None.
17= + TEST
18= - TEST
Door Status Function
Opens in any program, except in "LOCKED". When
Closed
dip # 1 on SW1 is set on ON opens also in "LOCKED".
Opening None.
Closing Reverts motion and opens.
Open Door won't close until input is released.
In pause None.
Closed None.
Opening Reverts motion and opens.
Closing None.
Open Closes in any program, except in "HOLD OPEN".
In pause None.
Closed Opens in any program, except in "LOCK".
Opening Reverts motion and closes, except in "HOLD OPEN".
Closing Reverts motion and opens, except in "LOCK".
Closes in any program, except in "HOLD OPEN".
Open
IMPORTANT: Auto Close function is disabled.
In pause Closes.
Prevents the opening of the other door when the
Closed
Interlock is operating
Opening None.
Closing None.
Open None.
In pause None.
Closed None.
Opening Opening continues at reduced speed.
Closing None.
Open None.
In pause None.
Closed The door does not open so long as the input is busy.
Opening It stops the automation.
Closing It stops the automation.
Open The door does not close so long as the input is busy.
The door does not open so long as the input is
In pause busy. Once free, the door closes at reduced speed
after 5 seconds.
21