Philips AVENT Premium SCF396 Manual Del Usuario página 9

the ribbed tab on the side of the valve. To clean the white valve, rub it gently between
your fingers in warm water with some dishwashing liquid. Do not insert objects into the
white valve, as this may cause damage.
Step 2A: Manual cleaning
1 Rinse the parts under a running tap with lukewarm water.
2 Soak all parts for 5 minutes in warm water with some mild dishwashing liquid.
3 Clean the parts with a cleaning brush in warm water with some mild dishwashing liquid.
4 Thoroughly rinse the parts under a running tap with cold clear water.
5 Leave the parts to air-dry on a clean tea towel or drying rack.
Step 2B: Cleaning in the dishwasher
Note: Food colorings may discolor parts.
1 Place all parts on the top rack of the dishwasher.
2 Put detergent or a dishwashing tablet in the machine and run a standard program.
3 Leave the parts to air-dry on a clean tea towel or drying rack.
Step 3: Disinfecting
Caution: During disinfection with boiling water, prevent the bottle or other parts from
touching the side of the pot. This can cause irreversible product deformation or damage
that Philips cannot be held liable for.
1 Fill a household pot with enough water to cover these parts and place all the parts in the pot. Let the
water boil for 5 minutes. Make sure the parts do not touch the side of the pot.
2 Allow the water to cool down.
3 Gently remove the parts from the water. Place the parts on a clean surface, tea towel or drying rack to
air-dry.
4 Store the dry items safely in a clean, protected area until needed. Ensure that the clean parts have air-
dried completely before storing them to help prevent germs and mold from growing.
Using the breast pump
Charging the breast pump
Fully charge the battery before you use the breast pump for the first time and when the battery is low. Fully
charging the battery takes up to 4 hours.
1 Switch off the device (Fig. 5).
2 Insert the adapter into the wall socket and insert the small plug at the other end into the motor unit.
3 The battery lights light up one by one and then all go out: the battery is charging (Fig. 6).
4 All lights are steady on (Fig. 7): the battery is fully charged.
5 Remove the adapter from the wall socket and pull the small plug out of the motor unit.
Battery indicator light description
-
Two lights are steady on: the battery is charged sufficiently for maximum two sessions.
-
First light flashes slowly: the battery is charged sufficiently for maximum one session.
-
First light flashes quickly: the battery is very low, the device will soon stop operating, charging is needed.
English
9