Philips AVENT Premium SCF396 Manual Del Usuario página 10

English
10
One session is the equivalent of 15 minutes (double electric breast pump) or 30 minutes (single electric
breast pump).
Assembling the breast pump
Make sure you have cleaned and disinfected the parts of the breast pump that come into contact with milk.
Warning: Be careful, when you have disinfected the breast pump parts by boiling
them, they can be very hot. To prevent burns, only start assembling the breast pump
when disinfected parts have cooled down.
Warning: Wash your hands thoroughly with soap and water before you touch breast
pump parts and breasts to prevent contamination. Avoid touching the inside of
containers or lids.
Check the breast pump kit parts for wear or damage before use and replace them if necessary.
Note: Correct placement of the cushion, silicone diaphragm and silicone tube is essential for the breast
pump to form a proper vacuum.
1 Insert the white valve into the pump body from underneath. Push the white valve in as far as possible
(Fig. 8).
2 Screw the pump body clockwise onto the bottle until it is securely fixed (Fig. 9).
3 Place the cushion into the pump body (Fig. 10) and make sure that the rim covers the pump body. Push
in the inner part of the cushion into the funnel against the line indicated with an arrow (Fig. 11).
4 Place the silicone diaphragm into the pump body (Fig. 12). Make sure that the silicone diaphragm fits
securely around the rim by pressing down with your thumbs (Fig. 13).
5 Attach the silicone tube and cap onto the silicone diaphragm. Push down the cap until it is securely in
place (Fig. 14).
6 Connect the tube(s) to the motor unit (Fig. 15).
7 When the breast pump is charged, you can use it cordless. Press and hold the on/off button until the
device switches on (Fig. 5). You can also use the breast pump connected to the wall socket. If the battery
is low, insert the adapter into the wall socket and insert the small plug at the other end into the motor
unit.
Motor unit part description
1 3
2 4
8
7
1 USB power inlet
5
2 On/off button with
6
pause/play function
3 Mode selection button
4 'Level down' button
5 'Level up' button
6 LED display
7 Tubing port for single breast
pump
8 Tubing ports for double
breast pump