Idiomas disponibles
Idiomas disponibles
ELECTRICAL REQUIREMENTS
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.
Voltage: 120 V~
Frequency: 60 Hz
Power: 1500 W
NOTE: If the plug does not fit in the outlet, contact a qualified electrician or service person. Do
not modify the plug in any way. Do not use an adapter.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician
or service person to install an outlet near the appliance.
The cord should be arranged so that it will not drape over the countertop or tabletop where it
can be pulled on by children or tripped over unintentionally.
GETTING STARTED
PREPARATION BEFORE FIRST USE
Remove and discard all labeling and packaging materials attached to your Semi-Automatic
Espresso Machine. Ensure you have removed all parts and accessories before discarding the
packaging.
Remove the Water Tank located at the back of the Semi-Automatic Espresso Machine by lifting
the Water Tank handle. Locate the plastic bag containing the Water Filter and
Water Filter Holder. Clean parts and accessories (Water Tank, Portafilter, Filter Baskets,
Milk Pitcher) using warm water and a gentle dish washing liquid, then rinse and dry thoroughly.
Wipe the outer housing, Bean Hopper, and Drip Tray with a soft damp cloth and dry thoroughly.
Do not immerse the outer housing or power cord in water or any other liquid.
Place the Semi-Automatic Espresso Machine on a dry, flat, level surface such as a countertop
or table.
WARNING
Electrical Shock Hazard
5
