Idiomas disponibles
Idiomas disponibles
The doorisdifficultto open
Explosion Hazard
Use nonflammable
cleaner.
Failure to do so can result in death, explosion, or fire.
•
Gaskets dirty or sticky? Clean gaskets and contact surfaces
with mild soap and warm water. Rinse and dry with soft
cloth.
Temperature
is too warm
New installation? Allow 24 hours following
installation
for
the refrigerator
to cool completely.
Door opened often or left open? Allows warm air to enter
refrigerator.
Minimize door openings and keep door fully
closed.
Large load of food added? Allow several hours for
refrigerator
to return to normal temperature.
Control(s) set correctly for the surrounding conditions? Adjust
the control(s) a setting colder. Check temperature
in
24 hours. See "Using the Control(s)."
There is interior moisture buildup
NOTE" Some moisture buildup is normal.
•
Humid room? Contributes to moisture buildup.
•
Door opened often or left open? Allows humid air to enter
refrigerator.
Minimize door openings and keep door fully
closed.
The ice maker is not producing ice or not enough ice
•
Refrigerator
connected to a water supply and the supply
shutoff valve turned on? Connect refrigerator
to water
supply and turn water shutoff valve fully open.
•
Kink in the water source line? A kink in the line can reduce
water flow. Straighten
the water source line.
•
Ice maker turned on? Make sure wire shutoff arm or switch
(depending
on model) is in the ON position.
•
New installation? Wait 24 hours after ice maker installation
for ice production to begin. Allow 3 days to completely
fill
the ice container.
Large amount of ice recently removed? Allow 24 hours for
ice maker to produce more ice.
Ice cube jammed in the ice maker ejector arm?
Remove ice from the ejector arm with a plastic utensil.
Reverse osmosis water filtration
system connected to your
cold water supply? This can decrease water pressure. See
"Water
Supply Requirements."
The ice cubes are hollow or small
NOTE" This is an indication of low water pressure.
•
Water
shutoff valve not fully open? Turn the water shutoff
valve fully open.
•
Kink in the water source line? A kink in the line can reduce
water flow. Straighten
the water source line.
•
Reverse osmosis water filtration system connected to your
cold water supply? This can decrease water pressure. See
"Water
Supply Requirements."
•
Questions remain regarding water pressure? Call a licensed,
qualified
plumber.
Off-taste,
odor or gray color in the ice
New plumbing connections? New plumbing connections can
cause discolored
or off-flavored
ice.
Ice stored too long? Discard ice. Wash ice bin. Allow
24 hours for ice maker to make new ice.
Odor transfer from food? Use airtight, moisture proof
packaging
to store food.
Are there minerals (such as sulfur) in the water? A water
filter may need to be installed to remove the minerals.
ACCESSORIES
Replacement
Parts
To order, please call 1-800-4-MY-HOME
® and ask for the part
number listed below, or contact your authorized
Kenmore
dealer.
Stainless Steel Cleaner and Polish-
Order Part #D22 M40083
R
Ice Maker Kit..
Order Part #8560
22
