Kenmore 106.6110 Serie Manual De Uso Y Cuidado página 18

Refrigerador con congelador en la parte superior
Idiomas disponibles

Idiomas disponibles

NOTE: The shelf should lower slightly and lock into place. If the
shelf does not appear stable, make sure both ends of the shelf
are inserted into the shelf supports.
!
Gosss
She
To remove and replace a glass shelf:
1. Lift the front of the shelf to raise the shelf tabs up and out of
the opening in each shelf track. Slide the shelf out the rest of
the way.
2. Replace the shelf by tilting the back end downward
to align
the back shelf tab under the track on each side of the
freezer. Gently push the shelf into the freezer until the two
center shelf tabs are positioned within the opening in each
track. Lower the shelf to rest on the shelf tracks.
DOOR FEATURES
Your model may have some or all of these features.
The door rails may be removed for easier cleaning.
Snap on Door Rails (on some models)
To remove and replace the rails:
1. Remove the door rails by pushing in slightly on the front of
one end of the bracket while pulling out on the inside tab.
Repeat these steps for the other end.
2. Replace the rails by aligning the ends of the brackets with
the buttons on the sides of the door liner. Firmly snap
bracket and assembly onto the tabs above the shelf as
shown.
Style 1 - Door Rails
Style 2 - Trivets
Frozen Food Storage Guide
Storage times will vary according
to the quality and type of
food, the type of packaging
or wrap used (should be airtight
and moisture-proof),
and the storage temperature.
Seal the
package or container securely to avoid taste and odor transfer
throughout the product. Ice crystals inside a sealed package are
normal. This simply means that moisture in the food and air
inside the package have condensed, creating
ice crystals.
Put no more unfrozen food into the freezer than will freeze
within 24 hours (no more than 2 to 3 Ibs of food per cubic foot
[907 to 1,350 g per L] of freezer space). Leave enough space in
the freezer for air to circulate around packages. The freezer
door must close tightly.
NOTE: For more information
on preparing
food for freezing,
check a freezer guide or reliable cookbook.
To remove and replace the racks/bins.
1. Remove the rack/bin
by lifting it and pulling it straight out.
2. Replace the rack/bin
by sliding it in above the desired
support and pushing it down until it stops.
18
loading